Gold assays received from diamond drilling at Rock Lodge
Released
Released
Announcement PDF
ASX RELEASE
Gold assays received from diamond
drilling at Rock Lodge.
ASX Announcement
30 January 2025.
Catalina Resources is
an Australian diversified
mineral exploration and
mine development
company.
Directors
Highlights
•
A two-hole diamond drilling program was completed in November
2024 at the Rock Lodge Project in NSW.
•
The best intersections were:
Executive Chairman
and
Company Secretary
Sanjay Loyalka
➢
Au in SRLRCD001.
Director
Richard Beazley
Director
Michael Busbridge
Director
Martin Bennett
11m @ 0.88 g/t Au from 193m, including 1m @ 5.25 g/t
•
➢
1m @ 1.87 g/t Au from 228m in SRLRCD001.
➢
1m @ 1.4 g/t Au from 177m in SRLRCD001.
Diamond drilling was designed to follow up intersections of gold
mineralization in shallow RC drilling.
Catalina Resources Ltd (ASX: CTN) (“Catalina” or the “Company”) is
pleased to announce that gold assay results from the recently completed
ASX Code
CTN
diamond drilling at the Rock Lodge Project in the Lachlan Fold Belt,
NSW have been received.
CONTACT DETAILS
Best intersections included 11m @ 0.88 g/t Au from 193m, including 1m
Unit 38
18 Stirling Highway
NEDLANDS WA 6009
@ 5.25 g/t Au, for hole SRLRCD001 (illustrated in the drilling section in
Figure 1). It corresponds to a very bleached and altered quartz sulphide
(pyrite pyrrhotite) clast supported breccia. Within the breccia, several
T +61 8 61181672
E info@catalinaresources.com.au
cross-cutting thin quartz carbonate veins are associated with semi
massive pyrite pyrrhotite laminations.
Two diamond holes (SRLRCD001-2 shown in Figure 2) were drilled for
a total of 351m (NQ core) to test below previous shallow reverse
circulation (RC) drilling that intersected multiple zones of gold
mineralization associated with thin quartz-sulphide veins.
The diamond core holes intersected broad zones of pervasive alteration
with intervals of sulphide veining and quartz-sulphide veining and
brecciation hosted by siltstone¹.
Catalina Resources Limited
ACN: 130 618 683
W: www.catalinaresources.com.au
ASX RELEASE.
Page 2 of 18
Figure 1: Cross section 5961505N showing Catalina Resources diamond hole SRLRCD001
testing under previous shallow drilling.
ASX RELEASE.
Page 3 of 18
Figure 2: Rock Lodge prospect drill location plan showing Catalina’s diamond drilling along with
the previous drilling.
Next Steps
Multi element assays (Cu, Pb, Zn, Bi, Ag, As) are yet to be received from SGS Laboratory and
are expected within a few weeks. Upon receipt of these assays, Catalina will assess the results
and assays along with results from all past drilling to decide further exploration plans.
ASX RELEASE.
Page 4 of 18
Background
The Rock Lodge Project (EL 9155) covers an area of 163 km² and is located 35 km south of
Cooma in the Lachlan Fold Belt, NSW. It is prospective for orogenic, Intrusion Related Gold
Systems (IRGS).
The RC drilling campaign completed by the Company in April 2022 at the Rock Lodge prospect
intersected significant mineralisation² (Table 1). The drilling was designed to test prioritised
targets consisting of extensive and continuous IP chargeability anomalies that are coincident with
very anomalous soil and rock chip geochemistry.
Hole No
SRLRC001
SRLRC001
SRLRC002
SRLRC002
SRLRC005
SRLRC005
SRLRC005
SRLRC005
SRLRC005
SRLRC005
SRLRC006
SRLRC006
Total
From To Interval
Intersection
Depth (m) (m) (m)
(m)
35
11
12
1
1m @ 3.7 g/t Au, 1.7 g/t Ag, 94 g/t Bi,
21
22
1
1m @ 0.76 g/t Au, 2.1 g/t Ag
35
0
8
8
8m @ 1.08 g/t Au, 4.2 g/t Ag, 0.28% As, 61 g/t Bi
0
3
3
incl. 3m @ 2.12 g/t Au, 6.67 g/t Ag, 0.6% As
102
75
77
2
2m @ 2.13 g/t Au, 2.4 g/t Ag, 0.6% As, 54 g/t Bi, 0.07% Cu
78
84
6
6m @ 0.75 g/t Au, 0.8% As, 22 g/t Bi, 0.05% Cu
82
84
2
incl. 2m @ 2.12 g/t Au, 2.4 g/t Ag, > 1% As, 0.07% Cu, 0.06% Zn
89
96
7
7m @ 0.33 g/t Au, 1.13 g/t Ag, 0.51% As, 51 g/t Bi, 0.06% Cu,
89
91
2
incl. 2m @ 0.49 g/t Au, 1.7 g/t Ag, 0.37% As, 60 g/t Bi, 0.13% Cu
97
99
2
2m @ 0.78 g/t Au,1.9 g/t Ag, 65 g/t Bi, 0.2% Cu
50
27
29
2
2m @ 6.1 g/t Ag, 0.26% Pb, 0.5% Zn, 28 g/t Cd
27
28
1
incl. 1m @ 10.6 g/t Ag, 0.44% Pb, 0.88% Zn, 51 g/t Cd
Table 1: Significant RC drill intersections. Catalina RC drilling program 2022.
References
This announcement contains information extracted from ASX market announcements reported in
accordance with the 2012 edition of the “Australasian Code for Reporting of Exploration Results,
Mineral Resources and Ore Reserves” (“2012 JORC Code”). Further details (including 2012
JORC Code reporting tables where applicable) of Mineral Resources and exploration results
referred to in this announcement can be found in the following ASX announcements and reports:
¹ Catalina Resources Pty Ltd. (ASX: CTN) announcement, 29th November 2024. Amended ASX
announcement - Diamond Drilling intersects broad alteration zones with quartz-sulphide veining and
brecciation.
² Catalina Resources Pty Ltd (ASX: CTN) announcement, 31st May 2022. RC Drilling hits multiple
gold, silver, and base metal lenses at Rock Lodge, NSW.
ASX RELEASE.
Page 5 of 18
Competent Person Statement
The review of historical exploration activities and results contained in this report is based on
information compiled by Michael Busbridge, a Member of the Australian Institute of Geoscientists
(AIG). He is a Director of Catalina Resources Ltd. He has sufficient experience which is relevant
to the style of mineralisation and types of deposits under consideration and to the activity which
he is undertaking to qualify as a Competent Person as defined in the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves
(the JORC Code).
Michael Busbridge has consented to the inclusion in the report of the matters based on his
information in the form and context in which it appears.
The Company confirms that it is not aware of any new information or data that materially affects
the information in the original reports, and that the form and context in which the Competent
Person’s findings are presented have not been materially modified from the original reports.
Where the Company refers to the Mineral Resources in this report (referencing previous releases
made to the ASX), it confirms that it is not aware of any new information or data that materially
affects the information included in that announcement and all material assumptions and technical
parameters underpinning the Mineral Resource estimate with that announcement continue to
apply and have not materially changed.
ABOUT CATALINA RESOURCES LIMITED
Catalina Resources Limited is an Australian diversified mineral exploration and mine development
company whose vision is to create shareholder value through the successful exploration of
prospective gold, base metal, lithium and iron ore projects and the development of these projects
into production.
The release of this document to the market has been authorised by the Board of Catalina
Resources Ltd.
ASX RELEASE.
Page 6 of 18
APPENDIX 1
Diamond drill hole specifications
Hole_ID
SRLRCD001
SRLRCD002
Hole_ID
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
East
688835
688807
Depth
53
95
117
127
144
161
214
253
291
99
129
159
189
216
246
258
North
5961495
5961295
Dip
-68.4
-66.1
-64
-63
-62
-61
-61
-59.5
-58
-68
-67
-67
-66.4
-64.5
-63
-61.3
RL
912.7
923.6
Azimuth
82.6
81.7
79
77.2
76
76
78
78
79
74
73.5
74.7
74.6
72.5
73
72.5
Pre-collar
Depth
117
90
Total
Depth
300
258
Dip
-77
-75
Azimuth
90
90
ASX RELEASE.
Page 7 of 18
APPENDIX 2
Summary of best gold intersections
Hole_ID
SRLRCD001
SRLRCD001
SRLRCD001
Drill Type
Diamond
Core
Diamond
Core
Diamond
Core
m From
m To
Intersection
width (m)
Au g/t
177
193
Incl. 203
178
204
204
1
11
1
1.4
0.88
5.25
228
229
1
1.87
ASX RELEASE.
Page 8 of 18
APPENDIX 3.
Diamond drill hole gold assay results
Hole_ID
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
mFrom
138.0
139.0
140.0
141.0
142.0
143.0
144.0
145.0
146.0
147.0
148.0
149.0
150.0
151.0
152.0
153.0
154.0
155.0
156.0
157.0
158.0
159.0
160.0
161.0
162.0
162.8
163.1
164.0
165.0
166.0
167.0
168.0
169.0
170.0
172.0
173.0
174.2
175.5
176.0
177.0
177.4
178.0
179.0
180.0
181.0
mTo
139.0
140.0
141.0
142.0
143.0
144.0
145.0
146.0
147.0
148.0
149.0
150.0
151.0
152.0
153.0
154.0
155.0
156.0
157.0
158.0
159.0
160.0
161.0
162.0
162.8
163.1
164.0
165.0
166.0
167.0
168.0
169.0
170.0
172.0
173.0
174.2
175.5
176.0
177.0
177.4
178.0
179.0
180.0
181.0
182.0
Interval
(m)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.75
0.35
0.9
1
1
1
1
1
1
2
1
1.15
1.3
0.55
1
0.35
0.65
1
1
1
1
Au (ppm )
<0.01
<0.01
<0.01
0.09
<0.01
<0.01
<0.01
0.04
0.03
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
0.02
<0.01
<0.01
<0.01
<0.01
<0.01
0.04
0.56
<0.01
0.01
0.01
<0.01
<0.01
<0.01
0.02
<0.01
0.5
0.01
1.42
1.37
0.02
0.01
<0.01
0.02
Hole_ID
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
mFrom
182.0
183.0
184.0
185.0
186.0
187.0
188.0
189.0
190.0
191.0
192.0
193.0
194.0
195.0
196.0
197.0
198.0
199.0
200.0
201.0
202.0
203.0
204.0
205.0
206.0
207.0
208.0
209.0
210.0
211.0
212.0
213.0
214.0
215.0
216.0
217.0
218.0
219.0
220.0
221.0
222.0
223.0
224.0
225.0
226.0
mTo
183.0
184.0
185.0
186.0
187.0
188.0
189.0
190.0
191.0
192.0
193.0
194.0
195.0
196.0
197.0
198.0
199.0
200.0
201.0
202.0
203.0
204.0
205.0
206.0
207.0
208.0
209.0
210.0
211.0
212.0
213.0
214.0
215.0
216.0
217.0
218.0
219.0
220.0
221.0
222.0
223.0
224.0
225.0
226.0
227.0
Interval
(m)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Au (ppm )
<0.01
0.01
0.48
<0.01
0.01
<0.01
0.03
0.02
0.01
0.11
0.02
3.26
0.02
0.02
<0.01
0.4
<0.01
0.02
0.34
<0.01
0.33
5.25
0.04
<0.01
<0.01
<0.01
0.01
0.11
<0.01
0.01
<0.01
<0.01
<0.01
<0.01
0.01
0.03
0.02
<0.01
0.01
0.01
<0.01
0.04
0.02
0.02
0.02
ASX RELEASE.
Page 9 of 18
Hole_ID
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
mFrom
227.0
228.0
229.0
230.0
231.0
232.0
233.0
234.0
235.0
236.0
237.0
238.0
239.0
240.0
241.0
242.0
243.0
244.0
245.0
246.0
247.0
248.0
249.0
250.0
251.0
252.0
253.0
254.0
255.0
256.0
257.0
258.0
259.0
260.0
261.0
262.0
263.0
264.0
265.0
266.0
267.0
268.0
269.0
270.0
271.0
mTo
228.0
229.0
230.0
231.0
232.0
233.0
234.0
235.0
236.0
237.0
238.0
239.0
240.0
241.0
242.0
243.0
244.0
245.0
246.0
247.0
248.0
249.0
250.0
251.0
252.0
253.0
254.0
255.0
256.0
257.0
258.0
259.0
260.0
261.0
262.0
263.0
264.0
265.0
266.0
267.0
268.0
269.0
270.0
271.0
272.0
Interval
(m)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Au (ppm )
0.12
1.87
0.03
0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
0.01
<0.01
<0.01
<0.01
<0.01
<0.01
0.01
<0.01
<0.01
0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
0.01
<0.01
<0.01
<0.01
0.02
<0.01
<0.01
<0.01
<0.01
0.01
0.01
0.01
0.02
0.02
0.05
0.02
0.01
0.02
Hole_ID
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD001
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
mFrom
272.0
273.0
273.9
275.0
276.0
277.0
278.0
279.0
280.0
281.0
282.0
283.0
284.0
285.0
286.0
287.0
288.0
289.0
290.0
291.0
292.0
293.0
294.0
295.0
296.0
297.0
298.0
299.0
94.0
95.0
96.0
97.0
98.0
99.0
107.0
108.2
109.0
110.1
111.0
112.0
113.0
114.0
115.0
116.0
mTo
273.0
273.9
275.0
276.0
277.0
278.0
279.0
280.0
281.0
282.0
283.0
284.0
285.0
286.0
287.0
288.0
289.0
290.0
291.0
292.0
293.0
294.0
295.0
296.0
297.0
298.0
299.0
300.2
95.0
96.0
97.0
98.0
99.0
100.0
108.2
109.0
110.1
111.0
112.0
113.0
114.0
115.0
116.0
117.0
Interval
(m)
1
0.9
1.1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.15
1
1
1
1
1
1
1.17
0.83
1.05
0.95
1
1
1
1
1
1
Au (ppm )
0.04
<0.01
<0.01
<0.01
0.01
0.01
0.02
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
0.02
0.02
0.02
0.02
0.1
<0.01
0.02
0.04
0.01
0.03
0.02
<0.01
<0.01
<0.01
<0.01
0.03
<0.01
0.01
0.07
0.02
<0.01
0.4
0.42
0.03
0.01
<0.01
<0.01
0.02
0.01
<0.01
<0.01
ASX RELEASE.
Page 10 of 18
Hole_ID
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
mFrom
117.0
118.0
129.4
130.4
132.0
133.0
134.0
135.0
136.0
137.0
138.0
139.0
140.0
140.9
141.4
142.0
143.0
144.0
148.5
156.0
157.0
158.0
159.0
160.0
161.0
162.0
163.0
164.0
165.0
166.0
167.0
168.0
169.0
170.0
171.0
172.0
177.0
178.0
179.0
180.0
186.0
mTo
118.0
119.0
130.4
132.0
133.0
134.0
135.0
136.0
137.0
138.0
139.0
140.0
140.9
141.4
142.0
143.0
144.0
145.0
149.1
157.0
158.0
159.0
160.0
161.0
162.0
163.0
164.0
165.0
166.0
167.0
168.0
169.0
170.0
171.0
172.0
173.0
178.0
179.0
180.0
181.0
187.0
Interval
(m)
1
1
1
1.6
1
1
1
1
1
1
1
1
0.9
0.5
0.6
1
1
1
0.6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Au (ppm )
0.01
0.01
<0.01
0.02
<0.01
<0.01
<0.01
<0.01
<0.01
0.01
<0.01
<0.01
<0.01
0.02
0.01
0.02
<0.01
0.1
0.02
0.02
0.01
<0.01
0.03
<0.01
<0.01
0.06
0.01
0.02
0.01
<0.01
0.05
0.01
<0.01
0.01
0.01
0.04
0.01
0.05
<0.01
<0.01
<0.01
Hole_ID
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
SRLRCD002
mFrom
187.0
188.0
189.0
190.0
191.0
192.0
193.0
194.0
195.0
195.9
197.0
204.0
205.0
214.0
215.0
216.0
217.0
218.5
220.0
221.0
222.0
223.0
224.0
225.0
226.0
227.0
228.0
229.5
230.6
231.2
232.0
233.0
234.0
235.0
236.0
237.0
238.0
239.0
240.0
241.0
242.0
243.0
244.0
mTo
188.0
189.0
190.0
191.0
192.0
193.0
194.0
195.0
195.9
197.0
198.0
205.0
206.0
215.0
216.0
217.0
218.5
220.0
221.0
222.0
223.0
224.0
225.0
226.0
227.0
228.0
229.5
230.6
231.2
232.0
233.0
234.0
235.0
236.0
237.0
238.0
239.0
240.0
241.0
242.0
243.0
244.0
245.0
Interval
(m)
1
1
1
1
1
1
1
1
0.9
1.1
1
1
1
1
1
1
1.5
1.5
1
1
1
1
1
1
1
1
1.5
1.1
0.6
0.8
1
1
1
1
1
1
1
1
1
1
1
1
1
Au (ppm )
<0.01
<0.01
<0.01
0.02
<0.01
<0.01
<0.01
<0.01
0.17
<0.01
<0.01
0.02
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
0.03
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
0.21
<0.01
<0.01
<0.01
<0.01
0.03
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
ASX RELEASE
APPENDIX 4
JORC Table 1 and Table 2
Section 1 Sampling Techniques and Data
Criteria
Sampling
techniques
Drilling
techniques
JORC Code explanation
Commentary
• Nature and quality of sampling (eg
• Catalina Resources has completed two
cut channels, random chips, or
NQ3 diamond drill holes for 351m at its
specific specialised industry
Rock Lodge Project, near Cooma NSW.
standard measurement tools
• Drilling is located within Catalina’s
appropriate to the minerals under
EL9155 and was completed in November
investigation, such as down hole
2024.
gamma sondes, or handheld XRF
• The sampling of the diamond holes was
instruments, etc). These examples
conducted by cutting the core in half
should not be taken as limiting the
using an Almonte Core Saw.
broad meaning of sampling.
• Sampling of the half core was completed
• Include reference to measures taken throughout the mineralized intervals of
to ensure sample representivity and
both core holes.
the appropriate calibration of any
• The core was cut along the orientation
measurement tools or systems used. line or where the orientation line was not
• Aspects of the determination of
defined, the core was cut 90 degrees to
mineralisation that are Material to
bedding/foliation.
the Public Report.
• The portion of half core selected for
• In cases where ‘industry standard’
analysis was consistent downhole to
work has been done this would be
remove sample bias (right of the
relatively simple (eg ‘reverse
orientation line).
circulation drilling was used to obtain • 1m half core samples are consistent in
1 m samples from which 3 kg was
volume and approximately similar weight.
pulverised to produce a 30 g charge • Quality control of the assaying comprised
for fire assay’). In other cases, more
the insertion of industry (OREAS)
explanation may be required, such
standards (certified reference material)
as where there is coarse gold that
and blank samples every 40th sample.
has inherent sampling problems.
• The total number of half core samples
Unusual commodities or
collected was 275, including QAQC
mineralization types (eg submarine
materials.
nodules) may warrant disclosure of
•
Samples were sent to the SGS
detailed information.
laboratory in Orange, NSW.
• Samples were crushed and then
pulverized so that 75% of the sample
passes 75µm.
• A representative sample of the pulp was
assayed for gold using Fire Assay.
Multielement was assayed by using Aqua
Regia followed by ICP-MS analysis.
• Drill type (eg core, reverse
• The drilling contractor was BG Drilling
circulation, open-hole hammer,
from Sydney. BG uses 3m drill rods and
rotary air blast, auger, Bangka,
a 3m split inner tube.
sonic, etc) and details (eg core
• The drilling rig was a Han-Jin 16M
diameter, triple or standard tube,
(Tracked) rig capable of drilling to
depth of diamond tails, face1000m.
sampling bit or other type, whether
• Other drilling equipment included a
core is oriented and if so, by what
Tracked Rod Carrier and a support truck
method, etc).
carrying a 8000 litre water tank.
Catalina Resources Limited
ACN: 130 618 683
W: www.catalinaresources.com.au
ASX RELEASE.
Page 12 of 18
Criteria
Drill sample
recovery
JORC Code explanation
•
•
•
Logging
•
•
•
Sub-sampling •
techniques and
sample
preparation
•
•
•
•
Commentary
• The diamond holes were drilled from RC
precollars drilled in 2022. SRLRCD001
precollar is 117m and SRLRCD002 is
90m.
• The RC precollar was cased with HQ
rods prior to drilling in NQ mode.
• NQ diamond core is stored in 4m core
trays prior to marking up, logging and
sampling.
• The drill holes were very wet and did not
run dry. Returned drill water was stored
in above ground storage tanks.
Method of recording and assessing • Representative diamond core samples
core and chip sample recoveries and are stored in core trays.
results assessed.
• Each trays stores 4m of NQ core.
Measures taken to maximise sample • Recovery was very good with some
recovery and ensure representative
broken core at the start of the diamond
nature of the samples.
tail.
Whether a relationship exists
• BG drilling uses an NQ triple tube that
between sample recovery and grade provides good core recovery.
and whether sample bias may have • Catalina does not anticipate any sample
occurred due to preferential
bias from loss/gain of material from
loss/gain of fine/coarse grained
cyclone.
material.
Whether core and chip samples
• All diamond core is measured and
have been geologically and
marked up to check sample recovery.
geotechnically logged to a level of
• Diamond core is logged on paper and
detail to support appropriate Mineral
later transferred to a digital format using a
Resource estimation, mining studies logging template.
and metallurgical studies.
• The core orientation line was extended
Whether logging is qualitative or
for the length of the core to assist in
quantitative in nature. Core (or
structural logging.
costean, channel, etc.) photography. • Geological logging records lithology,
The total length and percentage of
structure, texture, alteration and
the relevant intersections logged.
mineralization.
• Logging is qualitative in nature.
• All geological information noted above
has been completed by a competent
person as recognized by JORC.
• All diamond core was photographed in a
wet and dry state.
If core, whether cut or sawn and
• NQ diamond core was cut using an
whether quarter, half or all core
Almonte Core Saw along the orientation
taken.
line to produce half core for sampling.
If non-core, whether riffled, tube
• Mineralised intervals of half core were
sampled, rotary split, etc., and
sampled at 1m intervals.
whether sampled wet or dry.
• 1m of half core weighs 2-3kg.
For all sample types, the nature,
• Quality control of the assaying comprised
quality and appropriateness of the
the insertion of industry (OREAS)
sample preparation technique.
standards (certified reference material)
Quality control procedures adopted
every 40th sample.
for all sub-sampling stages to
• Samples were sent to SGS laboratory in
maximise representivity of samples.
Orange, NSW.
Measures taken to ensure that the
• Samples were crushed and then
ASX RELEASE.
Page 13 of 18
Criteria
•
Quality of
•
assay data and
laboratory tests
•
•
Verification of •
sampling and
assaying
•
•
•
Location of
data points
•
•
•
JORC Code explanation
Commentary
sampling is representative of the insitu material collected, including for
instance results for field
duplicate/second-half sampling.
Whether sample sizes are
appropriate to the grain size of the
material being sampled.
The nature, quality and
appropriateness of the assaying and
laboratory procedures used and
whether the technique is considered
partial or total.
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis,
including instrument make and
model, reading times, calibrations
factors applied and their derivation,
etc.
Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory
checks) and whether acceptable
levels of accuracy (ie lack of bias)
and precision have been
established.
The verification of significant
intersections by either independent
or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data
entry procedures, data verification,
data storage (physical and
electronic) protocols.
Discuss any adjustment to assay
data.
Accuracy and quality of surveys
used to locate drill holes (collar and
down-hole surveys), trenches, mine
workings and other locations used in
Mineral Resource estimation.
Specification of the grid system
used.
Quality and adequacy of topographic
control.
pulverized so that 95% of the sample
passes 75µm.
• A sample representative of the pulp was
then assayed for gold by Fire Assay. A
sample will also be digested with Aqua
Regia and assayed by ICP-MS for base
metals and multielements.
• All assaying was completed by a
laboratory in Orange, NSW.
• 1m half core samples were assayed for
gold by Fire Assay and base metals and
multielement by Aqua Regia ICP-MS.
• Standards from OREAS were added to
the 1m samples every 40th samples.
• The methods used are considered
appropriate for the style of mineralization
expected.
• No density data was captured.
• A laboratory routinely re-assay
anomalous assays (greater than 0.3 g/t
Au) as part of their normal QAQC
procedures.
• Verification of significant intersections
was undertaken by a second geologist.
• Validation of 1m sample assay data
involves checking of QAQC standard
assays.
• Data is entered into a logging template on
a desk top computer.
• All diamond drill hole coordinates are in
GDA94 Zone 55.
• All diamond holes were located by
handheld GPS with an accuracy of +/5m.
• There is no detailed documentation
regarding the accuracy of the topographic
control.
• A survey of the hole was conducted at
30m intervals using a standard REFLEX
north seeking gyro downhole to provide
the dip and azimuth data of the drill hole.
• Core orientation was undertaken every
6m downhole using a REFLEX core
orientation tool at the end of each drill
run.
ASX RELEASE.
Page 14 of 18
Criteria
JORC Code explanation
Commentary
Data spacing • Data spacing for reporting of
• The two diamond holes are spaced 200m
and distribution Exploration Results.
apart.
• Whether the data spacing and
• The spacing of the diamond core holes is
distribution is sufficient to establish
appropriate for understanding the
the degree of geological and grade
exploration potential and the identification
continuity appropriate for the Mineral of structural controls of mineralization.
Resource and Ore Reserve
• Half core was sampled at 1m intervals
estimation procedure(s) and
with no compositing.
classifications applied.
• Whether sample compositing has
been applied.
Orientation of
Whether the orientation of sampling • The relationship between drill orientation
data in relation
achieves unbiased sampling of
and the mineralized structures is based
to geological
possible structures and the extent to on surface mapping of strongly
structure
which this is known, considering the
weathered exposures and downhole
deposit type.
structural measurements.
If the relationship between the
• It is concluded from field observations
drilling orientation and the orientation and structural measurements that the
of key mineralized structures is
structures and foliation trends are
considered to have introduced a
approximately 350 degrees. Dips are
sampling bias, this should be
interpreted to be approximately vertical to
assessed and reported if material.
steeply west.
• The azimuth and dip of the diamond
holes were aimed to intersect the strike of
the rocks at right angles.
• Downhole widths of mineralization are not
known due to the structural deformation
of the rock seen in core..
Sample
• The measures taken to ensure
• All samples are packaged and managed
security
sample security.
under the supervision of Catalina
personnel.
• Core cutting and sampling was
conducted by consulting group RME
based in Orange, NSW.
Audits or
• The results of any audits or reviews • No sampling techniques or data have
reviews
of sampling techniques and data.
been independently audited.
•
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
•
tenement and
land tenure
status
Type, reference name/number,
location and ownership including
agreements or material issues with
third parties such as joint ventures,
partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
The security of the tenure held at the
• Diamond drill holes were all completed
•
within the granted EL9155 which is 100%
owned by Catalina Resources.
• Ground activity and security of tenure are
governed by NSW, Department of
Regional NSW – Mining, Exploration and
Geoscience via the Mining Act 1992.
• Catalina Resources received an
investigation commencement letter dated
ASX RELEASE.
Page 15 of 18
Criteria
JORC Code explanation
Commentary
time of reporting along with any known 21 April 2022 in relation to several alleged
impediments to obtaining a licence to
breaches.
operate in the area.
• Subsequently the Regulator issued a
direction to the Company that all
exploration works must cease under s.240
of the NSW Mining Act 1992.
• Following the Company taking corrective
actions the direction was revoked in April
2024 allowing Catalina Resources to
recommence exploration.
Exploration
• Acknowledgment and appraisal of
done by other
exploration by other parties.
parties
• The Rock Lodge prospect has been
explored by four companies in the last fifty
years: Southern Gold, Target Minerals,
GFM and Alt Resources. Their exploration
programs progressed to RC and diamond
drilling, but significant intersections were
not followed up, particularly at depth.
• In addition, consideration was not given
to the regional geology away from the old
workings and several target areas
generated from geochemical and
geophysical surveys at Rock Lodge were
also not followed up.
• The mineralisation is associated with
massive and disseminated pyrite‐
arsenopyrite‐chalcopyrite‐sphalerite
sulphides and quartz, within host phyllites
and sandstone of the Adaminaby group.
This is exposed on the surface as a
distinct gossan and ironstone. Sulphide
mineralisation is associated with silica
alteration and minor quartz veining,
indicating that a significant volume of
mineralising fluid has passed through the
rock.
• Six RC holes (MYRC001 to MYRC006)
were also drilled underneath old workings
at Rock Lodge by Alt Resources in 2018.
Their drilling also intercepted massive
sulphides in four holes with recorded
grades up to 5.4 g/t Au.
• Geophysical surveys (IP and EM) by Alt
Resources in 2016-2017, outlined deeper
and parallel targets that were no
Share your feedback
Discover